How to Control the Light of Moravian Star?

The Moravian Star has been a traditional decoration during Advent and Christmas for centuries. It symbolizes the star that led the Wise Men from the Far East to Bethlehem, where they presented gifts to the baby Jesus.

This foldable star can be stretched out into a 3D Moravian star, which has many colorful shining modes. It can be used as a holiday decoration for Christmas trees, doors, living rooms, courtyards, porches, etc.

Table Of Contents
  1. Getting started
  2. How to use the remote control to control the light
  3. Key Function
  4. Note
  5. How to use APP to control the light
  6. 1.    General settings：
  7. 2.    Detailed introduction of APP functions：

Getting started

How to install the light

It can be attached to the top of the tree using the support straight rod and ties included in the package.

How to use the remote control to control the light

Introduction

2.4G smart 28-key remote control is a new type of remote control. The remote control uses 2.4G Hz high-frequency radio frequency wireless control. Low power consumption and high-speed transmission. It is suitable for our smart SPI Controller with variety of built-in modes to choose from.

Product Parameter

Model Number: ZRRE1-28K

Product Name: 28Keys RF remote control (Model: E1)

CategorySmart Remote Controller RF 2.4G
Domination Principle APPMagic Home Pro
LanguageChinese, English, Japanese, German
Operation PlatformAndroid 4.4 or IOS 9.0 or higher
Input Voltage3V (2*AAA Battery)
Power ConsumptionStandby<2.3UA；Transmit：<5.4mA；Working：<4.7mA
Working Temperature-20-+45℃
Control DistanceVisible distance 40M
Dimension (L* B* H)105MM*47MM*13MM
Net Weight26.7g

Key Function

Note

  1. Remote control code matching: power on the device, hold down “ON ” key
  2. for 5 seconds, the device flashes slowly to indicate successful code matching.
  3. Remote code clearing: power on the device, hold down “OFF ” key for 5
  4. seconds, the device flashes quickly to indicate successful clearing
  5. Scene mode can only record one custom color

How to use APP to control the light

1.    General settings：

  1. In the setting interface, you can set the IC model, color correction, number of points (Total number of points cannot exceed 300 in each segment and total LED chips quantity cannot exceed 2048)
  2. The setting of IC number is applied to the smearing function

2.    Detailed introduction of APP functions：

A) Multi color function

Click “+” to DIY the lighting color and dynamic effects then save it.

The color of the light can be adjusted by the whole and each segment. App provides different columns for color selection or editing, and the brightness can also be

adjusted. In the segmentation interface, users can freely smear or erase the color of each segment, and also set the gradient effect.

B) Scene settings

There are Four Build-in scenes: “Life”, “Scenery”, “Festivals”, “Mood”, and click “DIY” or “Collection” to create your favorite light effect.

C) Playlist mode

Multiple light dynamic modes built-in, can set the time of lighting effects and enter

cycle mode. Select different scene modes, then set the duration of each scene

respectively, and play it by combining the sequence of different lighting effects.

D) Smear function

Before DIY, please set the number of IC in “Settings” to ensure that the number of lights is consistent with the device, Otherwise, the lighting effect is incorrect.

Before customize, please ensure that the IC number in app setting is the same as the light device, otherwise, the lighting effect will be incorrect.

E) Music Mode

1)  Synchronization function of lighting and music rhythm.

Click “Add Music” > Import a music file or import it from the built-in music library.

2)    MIC

The lights color will change with the sound rhythm when your phone microphone

catches the sound. The microphone sensitivity can be adjusted by the slider. There are

two ways to input the audio signal on the controller, built in APP microphone and external microphone (For sound control version).

F) Light timer

Smart lights automatically come on and off at given times through the timer function, choose your favorite effect and color then save it

G) Group Control

This mode allows you to create different groups to control more than one controller at the same time.

H) Link

Setting a group for the strip lights, enjoy the linkage lighting effect. Hold and drag the device on the list to change the order and the direction.

①The grouped light strips synchronized Linkage

②The grouped light strips change sequentially

Shopping Cart